Randall Fulton is an FAA Consultant DER with over 36 years of Electrical Engineering experience emphasizing software and electronic hardware development and verification. Randall has a Bachelor of Science in Electrical Engineering from the Pennsylvania State University and earned his Federal Aviation Administration Designated Engineering Representative credentials in software and programmable logic devices while working at Boeing Commercial Aircraft. As a Designated Engineering Representative, Randall has had approval authority for programmable logic devices since 1997 and has worked numerous Part 23 and Part 25 certification programs with field programmable gate arrays, application-specific integrated circuits (ASIC), and software. Randall, along with Roy Vandermolen, taught the DO-254 practitioners course for RTCA in Washington, D.C. from 2006 to 2009. Randall has also taught the Airborne Electronic Hardware Job Functions class for the Federal Aviation Administration Academy in Oklahoma City. Randall works as a Consultant DER through his company SoftwAir Assurance, Inc.
Roy Vandermolen is an electronics design engineer with over 35 years of experience in electronics ranging from vacuum tubes to programmable logic devices, but has spent the majority of that time designing and verifying programmable logic devices and the circuit cards that employ them. Roy has a Bachelor of Science in Electrical Engineering from the Massachusetts Institute of Technology (MIT), and is currently a Staff Engineer and Certification Manager for electronic flight control systems at Moog Aircraft, and an airborne electronics hardware Outside Boeing Authorized Representative (OBAR) for Boeing Commercial Aircraft. Roy has worked in a variety of engineering environments including research laboratories, educational institutions, military R&D facilities, and commercial aircraft flight controls manufacturers. In his career at Moog Aircraft Roy has been involved in the design, verification, and certification of numerous Level A flight control systems. Roy, along with Randall Fulton, taught the DO-254 practitioners course for RTCA in Washington, D.C. from 2006 to 2009.