Appendix B. Cisco Hardware Compatible with GNS3

This appendix lists the Cisco hardware that’s supported by Dynamips and GNS3. Dynamips only emulates Cisco routers that use MIPS architecture and does not support all Cisco models. After the list of supported routers, you’ll find a list of recommended IOS image files that GNS3 can automatically apply the correct Idle-PC values to, without performing an Idle-PC calculation.

Supported Cisco Hardware

In GNS3, you can emulate Cisco routers from five different series (1700, 2600, 3600, 3700, and 7200), with varying degrees of feature support.

Table B-1. 1700 Series Routers

1700 Series Routers

Table B-2. 2600 Series Routers

2600 Series Routers

Table B-3. 3600 Series Routers

3600 Series Routers

Table B-4. 3700 Series Routers

3700 Series Routers

Table B-5. 7200 Series Routers

7200 Series Routers

IOS Compatibility

The following routers are no longer getting IOS updates from Cisco. The IOS filenames listed here are the recommended versions for GNS3, though older versions should work fine.

Table B-6. c1700 Series Routers

c1700 Series Routers

Table B-7. c2600 Series Routers

c2600 Series Routers

Table B-8. c2691 Series Routers

c2691 Series Routers

Table B-9. c3620 Series Routers

c3620 Series Routers

Table B-10. c3640 Series Routers

c3640 Series Routers

Table B-11. c3660 Series Routers

c3660 Series Routers

Table B-12. c3725 Series Routers

c3725 Series Routers

Table B-13. c3745 Series Routers

c3745 Series Routers

The Cisco c7200 series router continues to receive IOS updates from Cisco and supports version 15.x of IOS.

Table B-14. c7200 Series Routers

c7200 Series Routers
..................Content has been hidden....................

You can't read the all page of ebook, please click here login for view all page.
Reset