Chapter 11. z/OS data feeds and discovery 365
5. The main RTASPEC panel opens, as shown in Figure 11-8 on page 364.
Enter ACTNDEF in this panel for a list of current action definitions.
6. From the ACTNDEF panel shown in Figure 11-10, you may either modify an
existing action by using the UPD command next to the desired definition, or
create a new definition by entering CRE at the command line. We create a new
definition in our scenario.
Figure 11-10 Action definition selection panel
7. Figure 11-11 on page 366 shows the panel that is used to create an action
definition. Enter an Action Name and a brief description. Ensure that the
following fields are defined:
– ALERT must be set to YES.
– CMAS Name must be set to the local CMAS. This is the CMAS where
EYUPARM must be specified in order to send generic alerts to IBM Tivoli
NetView for z/OS. The parameter for this is EYUPARM (ALERTVER(1)). Press
ENTER to create the Action Definition.
12DEC2002 10:19:52 ----------- INFORMATION DISPLAY ---------------------------
COMMAND ===> cre SCROLL ===> PAGE
CURR WIN ===> 1 ALT WIN ===>
W1 =ACTNDEF===========SC66PLEX=CSYS1H1==12DEC2002==10:19:51====CPSM========106
CMD Name Event View Msg Alert ARM Description
--- -------- ----- -------- --- ----- --- ------------------------------
CMZAF361 YES NO NO NO Region SOS
CMZA5742 YES NO NO NO Times MAXT reached
CMZBCF03 YES NO NO NO
CMZBCF81 YES NO NO NO total tsks wait for strings
CMZBC721 YES NO NO NO General SOS alert
CMZBE804 YES NO NO NO Max Active Threads
CMZBFE82 YES NO NO NO curr strg waits
CMZB5901 YES NO NO NO ESDSA Requests suspended
CMZB5922 YES NO NO NO Count of buffer waits
CMZB8081 YES NO NO NO Current number of tasks
CMZB8883 YES NO NO NO SDSA Requests suspended
CMZC0503 YES NO NO NO tot strg waits